- Contact Person : Mr. chen wuhua
- Company Name : Zhangjiagang AiBiM Plastics Machinery Co., Ltd.
- Tel : 0086-512-58433268
- Fax : 0086-512-58437296
- Address : Jiangsu,zhangjiagang,tangqiao Town, Zhangjiagang City
- Country/Region : China
- Zip : 215611
injection blow moulding machine
1 It adopts only one girder for the injection and blowing positions. there will be more space on the work table, and then it is easy to install the moulds. the core rod’s gyration semidiameter is more then before, now the products’ height is increased to 175mm.
2It’s hydraulic system adopts the Proportional Electro-Hydraulic Load Sensing Piston Pumps-Single Pump, it is energy-saving, high-efficiency. There is less return oil, when there is no load in the hydraulic system, oil temperature will be low, it can protect the hydraulic oil.
3 Injection clamping moulding section’s structure is improved, to ensure it can lock the injection mould better.
4The work table is cast by ductile cast iron, and it is more thick, more strong and more steady.
5Figure is be improved, it will be hold much less space, and is looks nice.
IBM45 Main Technological parameters
No | Name | Unit | Data | No. | Name | Unit | Data |
1 | screw stem diameter | mm | 45 | 16 | Min. die. thickness | mm | 240 |
2 | Max. theoretical injection capacity | cm3 | 286 | 17 | Motor power | kw | 22 |
3 | Total power for cylinder-heating | kw | 10 | 18 | Die.-heating power | kw | 1.6 |
4 | Control area of electric-heating | qty | 3 | 19 | Pressure of hydraulic system | Mpa | 14 |
5 | Clampling force of injection mold | kn | 450 | 20 | Min.working pressure of comp air | Mpa | 0.8 |
6 | Injection mold opening stroke | mm | 70 | 21 | Discharge rate of comp air | m3 /min | ≥0.8 |
7 | Blow mold opening stroke | mm | 120 | 22 | Comsumption of cooling water | m3 /h | 3 |
8 | Blow mold clamping force | kn | 78 | 23 | Dimension of machine(LxWxH) | mm | 4000X1670X2350 |
9 | Opening force of blow mold | kn | 52 | 24 | Machine weight | T | ~6 |
10 | Opening stroke of blow mold | mm | 120 | 25 | Range of product | L | 0.005-0.8 |
11 | Idle time(not contain injection time) | s | 8 | 26 | Height of product | mm | ≤200 |
12 | Ejector stroke | mm | 200 | 27 | Dia.of for mability products | mm | ≤100 |
13 | Hight of ejection frame | mm | 1200 | 28 | Dis.between core center and working table | mm | 120 |
14 | Lifting height of fotary table | mm | 60 | 29 | Nozzle thrust stroke | Ton/mm | 3.1-200 |
15 | Max.plate size of die.(LxW) | mm | 480x390 | 30 | Cover and area | mm | 4000x5000 |
injection blow moulding machine
